Renault Trafic Van Shelving, Storage and Accessories

Why Tradies Choose RolaCase for Their Renault Trafic

Forty-four years of Australian manufacturing sits behind every RolaCase Trafic kit. Components are powder-coated steel, cut and bent to suit the Trafic cargo dimensions, and packed flat for cost-effective delivery. The RolaShelf system is modular, so you can configure driver side only, passenger side only, or both sides, and mix shelf depths to match the tools you carry.

What this means in practice: a sparkie fitting out a Trafic SWB can run shallow Series 4 shelves on one side for cable reels and switchgear, while a plumber kitting out an LWB Crew can run deeper Series 10 shelves for fittings boxes and a drawer module for hand tools. The frame system is the same. The configuration changes.

Renault Trafic Shelving Systems

RolaShelf is our flagship shelving range and the most-fitted shelving system in the Australian Trafic market. Each Renault Trafic shelving kit is sized to the cargo bay of a specific body configuration and ships with vehicle-specific mounting brackets. Available depths are Series 4, 6, 8, 10 and 12, and every shelf is adjustable so you can re-set heights as your tooling changes.

• Driver side, passenger side, or dual-side configurations
• Adjustable shelf heights with reusable mounting points
• Compatible with RolaCase drawers, workbenches, bins and cargo barriers
• Powder-coated steel frame, manufactured at our Somersby NSW factory

Browse the full RolaShelf van shelving range for component-level detail, or use the product filter above to jump straight to your Trafic configuration.

Renault Trafic Body Configurations We Cover

Trafic body codes matter for fitment. Use the body configuration filter on this page to refine the catalogue, or jump straight to the sub-collection for your model:

• [Renault Trafic SWB] (2015+, 4 door and 5 door): shorter wheelbase, tighter cargo area, ideal for urban service work
• [Renault Trafic LWB] (2015+, 4 door and 5 door): longer wheelbase, deeper cargo area, suited to bulkier loads and heavier shelving builds
• [Renault Trafic LWB Crew] (2015+, 5 door): dual-row seating with reduced cargo area, requires a tighter shelving build (typically single side)

Driving an earlier generation Trafic or an unusual body code? Contact our team for a custom quote.

Renault Trafic Accessories and Storage Solutions

Shelving rarely runs solo. A complete Renault Trafic fitout layers shelving, drawers, flooring and barriers to lock everything down on the road. The accessories below all integrate directly with the RolaShelf frame system.

Metal Drawers and Cabinets

Lockable metal drawer kits handle up to 105kg per drawer on full-extension runners. Galvanised steel construction means they hold up to constant cycling on a busy van. Use a drawer module under shelving for hand tools, fasteners and consumables.

Cargo Flooring

Trafic van flooring solutions cover 5mm rubber for daily-use vans, 12mm marine grade plywood as a structural sub-floor, and 12mm phenolic hexa for heavy-duty anti-slip in wet-trade work. Pair flooring with a Renault Trafic trim kit for a clean, finished edge between the floor and the side walls.

Cargo Barriers and Partitions

A Renault Trafic mesh cargo barrier separates the cargo area from the driver cab and protects the front occupants in a sudden stop. For trades carrying paints, solvents, refrigerants or other volatile chemicals, the Renault Trafic anti-vapour partition adds a sealed barrier between cargo and cab.

Climate, Power and Cargo Hauling

Refrigeration and cold-chain operators can fit the Renault Trafic air conditioning curtain to maintain cargo temperature with the rear doors open. Roof storage is handled by the roof rack package with cross bars, ladder racks and a 4.9m conduit carrier.

Custom Renault Trafic Fitouts

Not every Trafic build fits a catalogue spec. For non-standard cargo areas, retrofits over existing accessories, or trade-specific configurations, our fitment team will quote a custom build. To start the process we ask for:

• Year, make and model
• Number of sliding doors
• VIN number (for body variant verification)
• Photos of the cargo area
• Any pre-existing accessories already fitted

Start with the vehicle configurator to scope your build, or contact our team directly on 1300 650 719.

Installation and Fitment

Most Renault Trafic kits are designed for confident DIY installation. Components are pre-cut, pre-drilled and supplied with vehicle-specific brackets. If you would prefer a professional install, we can connect you with our authorised installer network across Sydney, Melbourne, Brisbane, Perth, Adelaide and Canberra.

Renault Trafic Fleet Fitouts

If you are running a fleet of Renault Trafics, our Fleet Solutions team handles bulk orders for five or more vehicles. We standardise the kit spec, stage delivery against your vehicle handover schedule, and coordinate installer bookings nationally. Standardisation cuts downtime and means your drivers find tools in the same place across every van in your fleet.

Renault Trafic Fitout Gallery

Looking for inspiration? The Renault Trafic fitout gallery showcases real builds from Australian tradies and fleet operators. Useful for visualising shelving layouts, drawer placement and cargo flooring choices before you commit to a configuration.

Australian-Made Since 1982

Founded in 1982 by Sydney electrician Thomas Moloney, RolaCase has been manufacturing van fitouts on Australian soil for over four decades. Forty-four years, more than 445 products, and a single Somersby NSW factory. We build for Australian conditions, fit Australian vans, and ship Australia-wide.